Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Vermeer
  • Model:
    V4150A

View Manufacturers View Models

Specifications

Engine F3L1011 F Deutz Diesel 44.8 HP (33.4 kw)
Length 93.75" (238.1 cm)
Height 93.25" (236.9 cm) (including roll bar)
Width 63" (160 cm)
Weight 4200 lbs (1905 kg)

Additional Info

Digging Depth: 0"-60" (0cm-152cm)
Digging Width: 5"-16" (13cm-41cm)
Ground Drive: Hydrostatic

General
Weight: 3950 lb (1792 kg) (power unit only)
Length: 93.75" (238.1 cm)
Width: 63" (160 cm)
Tread width: 50.5" (128.3 cm)
Wheelbase: 55" (140 cm)
Front axle oscillation: 13° each direction;
10° w/ Dana 44
Height: 93.25" (236.9 cm) (including roll bar)
Outside turning diameter w/ rigid rear axle:
26' (7.9 m)
Outside turning diameter w/ rear-steer axle:
18.5' (5.6 m)
Ground clearance: 7" (18 cm); 8.75" (22.2 cm)
w/ planetary axles
Backfill blade angle of approach: 2

Engine
Model: F3L1011 F Deutz Diesel
Number of cylinders: 3
Displacement: 125 cu in (2048 cc)
Torque: 89 ft-lb (120 Nm) @ 3300 RPM
Max. no-load RPM: 3150 RPM
Max. gross hp: 45.3 hp (33.8 kw) @
3300 RPM
Net flywheel hp: 41.6 hp (31.0 kw) @
3000 RPM
Fuel tank capacity: 13.5 gal (51.1 L)
Fuel consumption: 2.03 gph (7.7 L/min)
Cooling: Air
Electrical system: 12-volt
Battery: 660 CCA, 165 min. reserve; optional
dual battery, 1150 CCA, 260 min. reserve
Air cleaner: Dry-type
Oil filter: Full-flow
Cold-start aid: Hydraulic bypass and/or
ether assist

Hydraulic System
Auxiliary pump displacement: .98 cu in
(16.1 cc) / rev.
Auxiliary gallonage: 12.7 gpm (48.1 L/min) @
3000 RPM
Auxiliary pump relief setting: 2500 psi
(172 bar)
Ground-drive pump displacement: 2.8 cu in
(45.9 cc) / rev.
Ground-drive gallonage: 36 gpm (136 L/min)
Ground-drive relief setting: 3625 psi (250 bar)
Trencher pump displacement: 2.8 cu in
(45.9 cc) / rev.
Trencher pump gallonage: 36 gpm
(136 L/min) @ 3000 RPM
Trencher pump relief setting: 4060 psi
(280 bar)
Oil tank capacity: 17 gal (64 L)
Oil system capacity: 20 gal (76 L)
Oil type: Vermeer HyPower 68 or equivalent
Oil cooler: Radiator-type

Gearbox
Single speed: 0 mph – 3.5 mph
(0 km/h – 5.6 km/h)
Optional two-speed: Low range —
0 fpm – 54 fpm (0 m/min – 16.5 m/min);
high range — 0 mph – 4.8 mph
(0 km/h – 7.7 km/h)

Ground-Drive
Front axles:
Dana 44 w/o LTD slip,
Dana 60 w/o LTD slip,
Dana 60 w/ LTD slip,
Dana 70 w/o LTD slip,
Dana 70 w/ LTD slip,
planetary w/ LTD slip
Rear axles:
Dana 60 rigid SF w/ LTD slip,
Dana 60 steer w/o LTD slip,
Dana 60 steer w/ LTD slip,
Dana 70 rigid w/ LTD slip,
Dana 70 steer w/o LTD slip,
Dana 70 steer w/ LTD slip,
planetary steer w/ LTD slip

Brakes
Park: Hand-set
Service brake: Hydrostatic system
(single speed)
Speed control: Forward, reverse (foot-pedaloperated
w/ hand control override)
Tire size: 29 x 12.5 – 15, 4-ply;
31 x 15.5 – 15, 8-ply

Features & Benefits
Feature: Forward/Reverse Ground Drive Foot Pedal
Benefit: Operators hands are freed, making this machine productive and easy to operate.

Feature: Grouped controls on the right side of the machine
Benefit: Convenient control location for ease of use while operating attachment.

Feature: Optional Backhoe Remote Controls
Benefit: The operator is able to reposition machine without leaving the backhoe operator station.

Feature: Cutters are supported by bolts through both side plates of the chain assembly.
Wear rings on end idler
Benefit: Added support lowers repair and maintenance costs.

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x