Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Vermeer
  • Model:
    D80x100 Series II
  • Rig Size:
    50,001 - 100,000 lbs pullback

View Manufacturers View Models

Specifications

Max Spindle Speed 180 RPM
Engine Cooling System 33 qt 31 L
Min Bend Radius 197.4' 60 m
Length 358" 909 cm
Min Bore Diameter 5" 13 cm
Type Firestick I
Entry Angle 26-37°
Make and Model John Deere 6068
Rod Loader Semi-Automated
Length 15' 4.6 m
Rod Carrying Capacity 180' 55 m
Torque 10,000 ft-lb 10,000 ft-lb
Fuel Type Diesel
Max Spindle Torque 10,000 ft-lb 13, 558 Nm
Pipe Diameter 3.5" 9 cm
Number of Cylinders 6
Ground Drive Speed 3.2 mph 5.1 kmh
Weight 250 lbs 114 kg
Weight 42,500 lbs 19,278 kg
Max Speed 2400 rpm
Max Flow 150 GPM 568 L/min
Weight of Pipe and Large Box 6,600 lbs 2,994 kg
Pullback 80,000lbs 36,287 kg
Fluid Tank 75 gal 283.9 L
Max Pressure 1100 PSI 76 BAR
Weight of Pipe and Small Box 3,600 lbs 1,633 kg
Height 118" 300 cm
Thrust 80,000 lbs 36,287 kg
Fuel Tank Capacity 75 gal 284 L
Width 93" 236 cm
Manufacturer's Gross HP Rating 200 hp 149 kW
Hydraulic Tank Capacity 85 gal 322 L
Displacement 415 cu-in 6.8 L
Rated Engine RPM 2400 rpm
Emissions Compliance Tier 3 Tier 3
Max Carriage Speed 175 ft-min 53.3 m-min
Joint Diameter 3.625" 9.2 cm

Additional Info

-*2015 NOVEMBER*-

GENERAL DIMENSIONS AND WEIGHTS
Length (Minimum Transport): 358" (909.3 cm)
Width (With Cab, Minimum Transport): 93" (236.2 cm)
Height (Minimum Transport): 118" (299.7 cm)
Weight: 42500 lbs (19277.7 kg)

ENGINE
Make and Model: John Deere PowerTech PE6068H200
Fuel Type: Diesel
Maximum Engine RPM: 2400 rpm
Idle Speed: 800 rpm
Rated RPM: 2400 rpm
Gross Horsepower: 200 hp (149.1 kw)
Net Horsepower: 180 hp (134.2 kw)
Torque (Maximum): 569 ft-lb (771 .5 Nm)
Displacement: 415 cu-in (6.8 L)
Number of Cylinders: 6
Cooling Method: CAC air to air
Aspiration: Turbocharged
Max Fuel Consumption: 10.4 gph (39.3 Iph)
Air Cleaner: Donaldson RadialSeal FRG130097
EPA Certification Family: Tier 3
Maximum Operating Angle (Fore/Aft)*: 25 continuous
Maximum Operating Angle (Left/Right)*: 25 continuous

OPERATIONAL
Thrust: 80000 lbs (36287.4 kg)
Pullback: 80000 lbs (36287.4 kg)
Maximum Carriage Speed at Maximum Engine RPM: 175 ft/min (53.3 m/min)
Maximum Spindle Torque (Low at Maximum Engine RPM): 10000 ft-lb (13558.2 Nm)
Maximum Spindle Torque (Medium at Maximum Engine RPM): 6700 ft-lb (9084 Nm)
Maximum Spindle Torque (High at Maximum Engine RPM): 5000 ft-lb (6779.1 Nm)
Maximum Spindle Speed at Max Engine RPM: 180 rpm
Minimum Bore Diameter: 5" (12.7 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 3.2 mph (5.2 km/h)
Automated Rod Loader: Yes, semi-automated
Noise Level at Operator's Ear: 92
Drill Rack Angle: 33 deg

ELECTRICAL SYSTEM
Voltage: 12
Battery Group Class: 31

FLUID CAPACITIES
Fuel Tank: 75 gal (283.9 L)
Engine Crankcase with Filter: 20 qt (18.9 L)
Hydraulic Tank: 85 gal (321 .8 L)
Hydraulic System: 115 gal (435.3 L)
Engine Cooling System: 40 qt (37.9 L)
Antifreeze Tank Capacity: 4 gal (15.1 L)

HYDRAULIC SYSTEM
Auxiliary Pump Flow at Maximum Engine RPM: 20 gpm
Auxiliary Pump Relief Pressure: 3000 psi (206.8 bar)
Thrust/Pullback Pump Flow at Max Engine RPM: 45 gpm (170.3 L/min)
Thrust/Pullback Pump Relief Pressure: 5850 psi (403.3 bar)
Rotation Pump Flow at Maximum Engine RPM: 60 gpm (227.1 L/min)
Rotation Pump Relief Pressure: 5400 psi (372.3 bar)
Hydraulic Supply Filter Rating: 200
Hydraulic Return Filter Rating: 5

DRILLING FLUID SYSTEM OPTION ONE
Maximum Flow: 150 gpm (567.8 L/min)
Maximum Pressure: 1100 psi (75.8 bar)

DRILLING FLUID SYSTEM OPTION TWO
Maximum Flow: 200 gpm (757.1 L/min)
Maximum Pressure: 1100 psi (75.8 bar)

DRILLING FLUID SYSTEM OPTION THREE
Maximum Flow: 200 gpm (757.1 L/min)
Maximum Pressure: 1100 psi (75.8 bar)
Brand: Aplex

DRILLING FLUID SYSTEM OPTION FOUR
On Board Tank Capacity: 200 gal (757.1 L)
Brand: Kerr
Maximum Pressure: 1100 psi (75.8 bar)

CRANE
Weight: 2500 lbs (1134 kg)
Maximum Lifting Capacity: 7530 lbs (3415.6 kg)
Maximum Lifting Capacity - Boom Extended/Max Reach: 2350 lbs (1065.9 kg)
Rotation: 200 deg
Maximum Reach: 246" (624.8 cm)
Wireless Remote: Yes

FEATURES
Breakout System: Yes - hydraulic
Drilling Lights: Standard
Flow Indicator: Yes
Stakedown System: Optional
Cab: Standard
Strike Alert: Yes

-*2015 MARCH*-

GENERAL DIMENSIONS AND WEIGHTS
Length (Minimum Transport): 358" (909.3 cm)
Width (With Cab, Minimum Transport): 93" (236.2 cm)
Height (Minimum Transport): 118" (299.7 cm)
Weight: 42500 lbs (19277.7 kg)

ENGINE
Make and Model: John Deere PowerTech PE6068H200
Fuel Type: Diesel
Maximum Engine RPM: 2400 rpm
Idle Speed: 800 rpm
Rated RPM: 2400 rpm
Gross Horsepower: 200 hp (149.1 kw)
Net Horsepower: 180 hp (134.2 kw)
Torque (Maximum): 569 ft-lb (771.5 Nm)
Displacement: 415 cu-in (6.8 L)
Number of Cylinders: 6
Cooling Method: CAC air to air
Aspiration: Turbocharged
Max Fuel Consumption: 10.4 gph (39.3 lph)
Air Cleaner: Donaldson RadialSeal FRG130097
EPA Certification Family: Tier 3
Maximum Operating Angle (Fore/Aft)*: 25 continuous
Maximum Operating Angle (Left/Right)*: 25 continuous

OPERATIONAL
Thrust: 80000 lbs (36287.4 kg)
Pullback: 80000 lbs (36287.4 kg)
Maximum Carriage Speed at Maximum Engine RPM: 175 ft/min (53.3 m/min)
Maximum Spindle Torque (Low at Maximum Engine RPM): 10000 ft-lb (13558.2 Nm)
Maximum Spindle Torque (Medium at Maximum Engine RPM): 6700 ft-lb (9084 Nm)
Maximum Spindle Torque (High at Maximum Engine RPM): 5000 ft-lb (6779.1 Nm)
Maximum Spindle Speed at Max Engine RPM: 180 rpm
Minimum Bore Diameter: 5" (12.7 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 3.2 mph (5.2 km/h)
Automated Rod Loader: Yes, semi-automated
Noise Level at Operator's Ear: 92
Drill Rack Angle: 33 deg

ELECTRICAL SYSTEM
Voltage: 12
Battery Group Class: 31

FLUID CAPACITIES
Fuel Tank: 75 gal (283.9 L)
Engine Crankcase with Filter: 20 qt (18.9 L)
Hydraulic Tank: 85 gal (321.8 L)
Hydraulic System: 115 gal (435.3 L)
Engine Cooling System: 40 qt (37.9 L)
Antifreeze Tank Capacity: 4 gal (15.1 L)

HYDRAULIC SYSTEM
Auxiliary Pump Flow at Maximum Engine RPM: 20 gpm
Auxiliary Pump Relief Pressure: 3000 psi (206.8 bar)
Thrust/Pullback Pump Flow at Max Engine RPM: 45 gpm (170.3 L/min)
Thrust/Pullback Pump Relief Pressure: 5850 psi (403.3 bar)
Rotation Pump Flow at Maximum Engine RPM: 60 gpm (227.1 L/min)
Rotation Pump Relief Pressure: 5400 psi (372.3 bar)
Hydraulic Supply Filter Rating: 200
Hydraulic Return Filter Rating: 5

DRILLING FLUID SYSTEM OPTION ONE
Maximum Flow: 150 gpm (567.8 L/min)
Maximum Pressure: 1100 psi (75.8 bar)

DRILLING FLUID SYSTEM OPTION TWO
Maximum Flow: 200 gpm (757.1 L/min)
Maximum Pressure: 1100 psi (75.8 bar)

DRILLING FLUID SYSTEM OPTION THREE
Maximum Flow: 200 gpm (757.1 L/min)
Maximum Pressure: 1100 psi (75.8 bar)
Brand: Aplex

DRILLING FLUID SYSTEM OPTION FOUR
On Board Tank Capacity: 200 gal (757.1 L)
Brand: Kerr
Maximum Pressure: 1100 psi (75.8 bar)

CRANE
Weight: 2500 lbs (1134 kg)
Maximum Lifting Capacity: 7530 lbs (3415.6 kg)
Maximum Lifting Capacity - Boom Extended/Max Reach: 2350 lbs (1065.9 kg)
Rotation: 200 deg
Maximum Reach: 246" (624.8 cm)
Wireless Remote: Yes

FEATURES
Breakout System: Yes- hydraulic
Drilling Lights: Standard
Flow Indicator: Yes
Stakedown System: Optional
Cab: Standard
Strike Alert: Yes

-*2009*-

GENERAL
Length: 30"(9.1 m)
Width (transport): 93" (236.2 cm)
Height: 118" (299.7 cm)
Height (crane option): 11' (3.4 m)
Weight (without drill rod): 36,600 lb (16,601.5 kg)

POWER
Engine: John Deere 6068 Tier 3
Gross power rating: 200 hp (149.1 kW)
Rated rpm: 2400

FLUID CAPACITIES
Engine oil (including filter): 5 gal (18.9 L)
Fuel tank: 75 gal (284 L)
Hydraulic tank: 85 gal (321.8 L)
Weight (crane option, short rod box): 43,000 lb (19,504.5 kg)

OPERATIONAL
Max spindle torque:
-Low: 10,000 ft-lb (13,558.2 Nm)
-Medium: 6700 ft-lb (9084 Nm)
-High: 5000 ft-lb (6779.1 Nm)
Max spindle speed: 180 rpm
Thrust: 80,000 lb (36,287.4 kg)
Pullback: 80,000 lb (36,287.4 kg)
Min bore diameter: 5" (12.7 cm)
Max ground drive speed: 3.2 mph (5.1 km/h)
Max carriage speed: 175 fpm (53.3 m/min)
Drill rack angle: 22° – 33°
Remote lockout: Yes
Electrical strike alert: Yes

DRILLING FLUID SYSTEM
Max flow: 150 or 200 gpm (567.8 or 757.1 L/min)
Max pressure: 1100 psi (75.8 bar)

CRANE
Max lifting capacity: 7530 lb (3415.6 kg)
Max lifting capacity (at full reach): 2350 lb (1065.9 kg)
Rotation: 200 degrees
Max reach: 20.6' (6.3 m)

FEATURES
Breakout system: Power vise
Drilling lights
Flow indicator

DRILL STEM
Type: Firestick
Length: 15' (4.6 m)
Joint diameter: 3.625" (9.2 cm)
Pipe diameter: 3.5" (8.9 cm)
Weight: 250 lb (113.4 kg)
Clip weight (12 rod): 3600 lb (1632.9 kg)
(24 rod): 6600 lb (2993.7 kg) / less rod box
Min bend radius: 197.4' (60.2 m)
Rod carrying capacity (24 rod): 360' (109.7 m)

-*2005*-

GENERAL
Length: 358" (909 cm)
Width (fixed tracks): 93" (236 cm)
Height: 118" (300 cm)
Weight: 37,500 lb (17,010 kg)

OPERATIONAL
Max spindle torque:
@ 90 rpm: 10,000 ft-lb (13,558 Nm)
@ 120 rpm: 6700 ft-lb (9084 Nm)
@ 180 rpm: 5000 ft-lb (6779 Nm)
Max spindle speed: 180 rpm
Thrust (actual): 80,000 lb (36,287 kg)
Pullback (actual): 80,000 lb (36,287 kg)
Min bore diameter: 5" (13 cm)
Max ground drive speed: 3.2 mph (5.1 km/h)
Max carriage speed: 175 fpm (53.3 m/min)
Drill rack angle: 22 – 33°
Remote lockout: Yes

DRILLING FLUID SYSTEM
Max flow: 150 or 200 gpm (568 or 757 L/min)
Max pressure: 1100 psi (76 bar)

FEATURES
Breakout system: Power vise
Drilling lights
Flow indicator

DRILL STEM
Type: FIRESTICK I
Length: 15' (4.6 m)
Joint diameter: 3.625" (9.2 cm)
Pipe diameter: 3.5" (9 cm)
Weight: 250 lb (114 kg)
Clip Weight -
-(12 rod): 3600 lb (1633 kg)
-(24 rod): 6600 lb (2994 kg) / less rod box
Min bend radius: 197.4' (60 m)
Rod Carrying Capacity:
-(12 rod): 180' (55 m)
-(24 rod): 360' (110 m)

Type: FIRESTICK II
Length: 15' (4.6 m)
Joint diameter: 3.86" (9.8 cm)
Pipe diameter: 2.96" (7.3 cm)
Weight: 200 lb (91 kg)
Clip Weight:
-(12 rod): 2400 lb (1089 kg)
-(24 rod): 4800 lb (2268 kg) / less rod box
Min bend radius: 168.7' (51.4 m)
Rod Carrying Capacity:
-(12 rod): 180' (55 m)
-(24 rod): 360' (110 m)

POWER
Engine: John Deere 6068
Gross power rating: 200 hp (149 kW)
Net power rating: 180 hp (139 kW)
Rated rpm: 2400

FLUID CAPACITIES
Engine oil (including filter): 33 qt (31 L)
Fuel tank: 75 gal (284 L)
Hydraulic reservoir: 85 gal (322 L)

FEATURES AND BENEFITS

Feature: 10,000 ft-lbs of Rotational Torque
Benefit: With 10,000 ft-lbs (13,558 Nm) of torque, this machine has enough power to turn cutting tools in demanding soil conditions and longer distances and to accommodate larger backreamers.

Feature: On-Board Pump
Benefit: The on-board pump provides high flow for mud motors and hole openers and increases backreaming efficiency on larger diameter backreams. All pump options are piston type with piston wash.

Feature: 80,000 lbs Pullback
Benefit: The D80x100 Series II has sufficient pullback to handle longer, heavier product.

Feature: Rack and Pinion Drive
Benefit: This simple system provides smooth operation. The D80x100 Series II's unique narrow rack and pinion design helps to maintain a small footprint for access into congested areas.
The rack is sectionalized and bolts on for easy repair or replacement.

Feature: Adjustable Speed Controls for Thrust, Pullback, and Rotation
Benefit: Adjustable controls allow the operator to dial in different drilling inputs without the need for constant feathering of the controls.

Feature: Large Water Course
Benefit: A 1.875" water course through the head shaft and drive chuck and 2.0" water course through the drill stem upset provide a large water course for obtaining high flow capabilities.

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x